Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #6: Sun Mar 5 18:01:41 CET 2006 root@tablet.dino.sk:/usr/obj/usr/src/sys/TABLET WARNING: WITNESS option enabled, expect reduced performance. Using 32 colors for the VM-PQ tuning (0, 0) Preloaded elf kernel "/boot/kernel/kernel" at 0xc0856000. Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc0856188. Preloaded elf module "/boot/kernel/sound.ko" at 0xc085623c. Preloaded elf module "/boot/kernel/apm.ko" at 0xc08562e8. Calibrating clock(s) ... i8254 clock: 1193164 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 995504623 Hz CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (995.50-MHz 586-class CPU) Origin = "GenuineTMx86" Id = 0x543 Stepping = 3 Features=0x80893f Processor revision 1.5.0.2 Code Morphing Software revision 4.4.0-10-156 20030501 16:35 official release 62.0.1-4.4.0#1 real memory = 243204096 (231 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000000e3a3fff, 225951744 bytes (55164 pages) avail memory = 228302848 (217 MB) Crusoe LongRun support enabled, current mode: 2 <1000MHz 1350mV 100%> bios32: Found BIOS32 Service Directory header at 0xc00f7710 bios32: Entry = 0xfd6a0 (c00fd6a0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd6a0+0x16c pnpbios: Found PnP BIOS data at 0xc00f7760 pnpbios: Entry = f0000:a13e Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> mem: nfslock: pseudo-device null: io: random: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface cpu0 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03951279) pcibios: BIOS version 2.10 Found $PIR table, 8 entries at 0xc00fdf40 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 A 0x01 3 4 6 9 10 11 12 14 15 embedded 0 7 B 0x02 3 4 6 9 10 11 12 14 15 embedded 0 7 C 0x03 3 4 6 9 10 11 12 14 15 embedded 0 7 D 0x04 3 4 6 9 10 11 12 14 15 embedded 0 12 A 0x01 3 4 6 9 10 11 12 14 15 embedded 0 12 B 0x02 3 4 6 9 10 11 12 14 15 embedded 0 12 C 0x03 3 4 6 9 10 11 12 14 15 embedded 0 5 A 0x02 3 4 6 9 10 11 12 14 15 embedded 0 8 A 0x01 3 4 6 9 10 11 12 14 15 embedded 0 11 A 0x01 3 4 6 9 10 11 12 14 15 embedded 0 11 B 0x02 3 4 6 9 10 11 12 14 15 embedded 0 10 A 0x04 3 4 6 9 10 11 12 14 15 embedded 0 9 A 0x01 3 4 6 9 10 11 12 14 15 pcib0: pcibus 0 on motherboard pir0: on motherboard $PIR: Links after initial probe: Link IRQ Rtd Ref IRQs 0x1 255 N 5 3 4 6 9 10 11 12 14 15 0x2 255 N 4 3 4 6 9 10 11 12 14 15 0x3 255 N 2 3 4 6 9 10 11 12 14 15 0x4 255 N 2 3 4 6 9 10 11 12 14 15 $PIR: Found matching pin for 0.7.INTA at func 1: 255 $PIR: Found matching pin for 0.7.INTC at func 5: 255 $PIR: Found matching pin for 0.12.INTA at func 0: 9 $PIR: Found matching pin for 0.12.INTB at func 1: 11 $PIR: Found matching pin for 0.12.INTC at func 2: 10 $PIR: Found matching pin for 0.5.INTA at func 0: 11 $PIR: Found matching pin for 0.8.INTA at func 0: 9 $PIR: Found matching pin for 0.11.INTA at func 0: 9 $PIR: Found matching pin for 0.11.INTB at func 1: 11 $PIR: Links after initial IRQ discovery: Link IRQ Rtd Ref IRQs 0x1 9 Y 5 3 4 6 9 10 11 12 14 15 0x2 11 Y 4 3 4 6 9 10 11 12 14 15 0x3 10 Y 2 3 4 6 9 10 11 12 14 15 0x4 255 N 2 3 4 6 9 10 11 12 14 15 $PIR: IRQs used by BIOS: 9 10 11 $PIR: Interrupt Weights: [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] [ 0 0 0 0 0 0 0 0 0 5 2 4 0 0 0 0 ] pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1279, dev=0x0395, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base e8100000, size 20, enabled found-> vendor=0x1279, dev=0x0396, revid=0x00 bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1279, dev=0x0397, revid=0x00 bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0112, revid=0xb2 bus=0, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base e9000000, size 24, enabled map[14]: type 3, range 32, base f0000000, size 27, enabled $PIR: 0:5 INTA routed to irq 11 found-> vendor=0x1106, dev=0x0686, revid=0x40 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00001040, size 4, enabled found-> vendor=0x1106, dev=0x3057, revid=0x40 bus=0, slot=7, func=4 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3058, revid=0x50 bus=0, slot=7, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001400, size 8, port disabled map[14]: type 4, range 32, base 00001054, size 2, enabled map[18]: type 4, range 32, base 00001050, size 2, enabled found-> vendor=0x8086, dev=0x1059, revid=0x10 bus=0, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0013, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8020000, size 12, enabled map[14]: type 4, range 32, base 00001000, size 6, enabled map[18]: type 1, range 32, base e8000000, size 17, enabled $PIR: 0:8 INTA routed to irq 9 found-> vendor=0x104c, dev=0xac55, revid=0x01 bus=0, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled $PIR: 0:11 INTA routed to irq 9 found-> vendor=0x104c, dev=0xac55, revid=0x01 bus=0, slot=11, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x8210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled $PIR: 0:11 INTB routed to irq 11 found-> vendor=0x1033, dev=0x0035, revid=0x41 bus=0, slot=12, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8022000, size 12, enabled $PIR: 0:12 INTA routed to irq 9 found-> vendor=0x1033, dev=0x0035, revid=0x41 bus=0, slot=12, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8023000, size 12, enabled $PIR: 0:12 INTB routed to irq 11 found-> vendor=0x1033, dev=0x00e0, revid=0x02 bus=0, slot=12, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x84 (3960 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8021000, size 8, enabled $PIR: 0:12 INTC routed to irq 10 pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) vgapci0: mem 0xe9000000-0xe9ffffff,0xf0000000-0xf7ffffff irq 11 at device 5.0 on pci0 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1040-0x104f at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1040 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] isab1: at device 7.4 on pci0 isa: isa0 already exists; skipping it device_attach: isab1 attach returned 6 pcm0: port 0x1400-0x14ff,0x1054-0x1057,0x1050-0x1053 at device 7.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1400 $PIR: 0:7 INTC routed to irq 10 pcm0: [MPSAFE] pcm0: pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0 pcm0: sndbuf_setmap 17a000, 1000; 0xc20a6000 -> 17a000 pcm0: sndbuf_setmap 19c000, 1000; 0xc20a8000 -> 19c000 fxp0: port 0x1000-0x103f mem 0xe8020000-0xe8020fff,0xe8000000-0xe801ffff irq 9 at device 8.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8020000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1059 0e11 00b5 0010 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:0b:cd:ac:b8:24 fxp0: [MPSAFE] cbb0: irq 9 at device 11.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac55104c 0x02100007 0x06070001 0x00822000 0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400109 0x40: 0x00b50e11 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x08449060 0x00000000 0x00000000 0x00001022 0x90: 0x606400c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000001f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: irq 11 at device 11.1 on pci0 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac55104c 0x82100007 0x06070001 0x00822000 0x10: 0x80001000 0x020000a0 0x20050400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b 0x40: 0x00b50e11 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x08449060 0x00000000 0x00000000 0x00001022 0x90: 0x606400c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000001f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 ohci0: mem 0xe8022000-0xe8022fff irq 9 at device 12.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8022000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xe8023000-0xe8023fff irq 11 at device 12.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8023000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: on ohci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xe8021000-0xe80210ff irq 10 at device 12.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe8021000 ehci0: [GIANT-LOCKED] usb2: EHCI version 0.95 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 5 ports with 5 removable, self powered ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 16 devices, largest 54 bytes PNP0c01: adding memory range 0-0x9bfff, size=0x9c000, align=0x1 PNP0c01: adding memory range 0xe8000-0xfffff, size=0x18000, align=0x1 PNP0c01: adding fixed memory32 range 0x100000-0xe7fffff, size=0xe700000 pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 pnpbios: handle 1 device ID PNP0c02 (020cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 8 device ID PNP0800 (0008d041) PNP0c02: adding memory32 range 0x9c000-0x9ffff, size=0x4000, align=0x4000 pnpbios: handle 9 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x8000-0x807f, size=0x80, align=0x1 PNP0c02: adding io range 0x8100-0x810f, size=0x10, align=0x1 pnpbios: handle 11 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0x3400-0x347f, size=0x80, align=0x1 pnpbios: handle 12 device ID PNP0c02 (020cd041) PNP0c02: adding memory32 range 0xe7000-0xe7fff, size=0x1000, align=0x1000 pnpbios: handle 13 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xce000-0xcffff, size=0x2000 pnpbios: handle 14 device ID PNP0c02 (020cd041) pnpbios: handle 19 device ID PNP0e03 (030ed041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcdfff,0xe7000-0xe7fff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0 failed to probe at port 0x60 on isa0 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x601 0x601 0x601 0x601 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FAST] sio1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: failed to probe at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0 unknown: failed to probe at port 0x61 pnpid PNP0800 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xe7000-0xe7fff pnpid PNP0c02 on isa0 cbb2: Cannot allocate I/O unknown: failed to probe at irq 3 pnpid PNP0e03 on isa0 ukbd0: on uhub0 kbd0 at ukbd0 kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000 ums0: on uhub0 ums0: 3 buttons and Z dir. Device configuration finished. procfs registered Timecounter "TSC" frequency 995504623 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on 82C686B chip ad0: 38154MB at ata0-master PIO4 ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 Trying to mount root from ufs:/dev/ad0s3a start_init: trying /sbin/init