Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.5-PRERELEASE #1: Wed Mar 1 21:09:31 CET 2006 root@tablet.dino.sk:/usr/obj/usr/src/sys/TABLETk Preloaded elf kernel "/boot/kernel/kernel" at 0xc07d5000. Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc07d5244. Preloaded elf module "/boot/kernel/sound.ko" at 0xc07d52f8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07d53a4. Calibrating clock(s) ... i8254 clock: 1193143 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 995502716 Hz CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (995.50-MHz 586-class CPU) Origin = "GenuineTMx86" Id = 0x543 Stepping = 3 Features=0x80893f Processor revision 1.5.0.2 Code Morphing Software revision 4.4.0-10-156 20030501 16:35 official release 62.0.1-4.4.0#1 real memory = 243204096 (231 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000825000 - 0x000000000e3abfff, 230191104 bytes (56199 pages) avail memory = 232493056 (221 MB) Crusoe LongRun support enabled, current mode: 2 <1000MHz 1350mV 100%> bios32: Found BIOS32 Service Directory header at 0xc00f7710 bios32: Entry = 0xfd6a0 (c00fd6a0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd6a0+0x16c pnpbios: Found PnP BIOS data at 0xc00f7760 pnpbios: Entry = f0000:a13e Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> random: io: mem: null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03951279) pcibios: BIOS version 2.10 Found $PIR table, 8 entries at 0xc00fdf40 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 A 0x01 3 4 6 9 10 11 12 14 15 embedded 0 7 B 0x02 3 4 6 9 10 11 12 14 15 embedded 0 7 C 0x03 3 4 6 9 10 11 12 14 15 embedded 0 7 D 0x04 3 4 6 9 10 11 12 14 15 embedded 0 12 A 0x01 3 4 6 9 10 11 12 14 15 embedded 0 12 B 0x02 3 4 6 9 10 11 12 14 15 embedded 0 12 C 0x03 3 4 6 9 10 11 12 14 15 embedded 0 5 A 0x02 3 4 6 9 10 11 12 14 15 embedded 0 8 A 0x01 3 4 6 9 10 11 12 14 15 embedded 0 11 A 0x01 3 4 6 9 10 11 12 14 15 embedded 0 11 B 0x02 3 4 6 9 10 11 12 14 15 embedded 0 10 A 0x04 3 4 6 9 10 11 12 14 15 embedded 0 9 A 0x01 3 4 6 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 11 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 11 func 1 acpi0: Power Button (fixed) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_ec0: port 0x66,0x62 on acpi0 acpi_ec0: info: new max delay is 10 us acpi_ec0: info: new max delay is 40 us acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_ec0: info: new max delay is 50 us acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 4 ACPI timer: 0/846 0/3 1/2 0/14 1/2 1/2 0/3 1/2 1/2 1/2 -> 6 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: on acpi0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.PIB_.LNKA irq 0: [ 9] 9+ low,level,sharable 0.7.0 \\_SB_.PCI0.PIB_.LNKB irq 0: [11] 11+ low,level,sharable 0.7.1 \\_SB_.PCI0.PIB_.LNKC irq 0: [ 7] 10+ low,level,sharable 0.7.2 \\_SB_.PCI0.PIB_.LNKD irq 0: [15] 0+ low,level,sharable 0.7.3 \\_SB_.PCI0.PIB_.LNKA irq 0: [ 9] 9+ low,level,sharable 0.12.0 \\_SB_.PCI0.PIB_.LNKB irq 0: [11] 11+ low,level,sharable 0.12.1 \\_SB_.PCI0.PIB_.LNKC irq 0: [ 7] 10+ low,level,sharable 0.12.2 \\_SB_.PCI0.PIB_.LNKB irq 0: [11] 11+ low,level,sharable 0.5.0 \\_SB_.PCI0.PIB_.LNKA irq 0: [ 9] 9+ low,level,sharable 0.8.0 \\_SB_.PCI0.PIB_.LNKA irq 0: [ 9] 9+ low,level,sharable 0.11.0 \\_SB_.PCI0.PIB_.LNKB irq 0: [11] 11+ low,level,sharable 0.11.1 \\_SB_.PCI0.PIB_.LNKA irq 0: [ 9] 9+ low,level,sharable 0.9.0 \\_SB_.PCI0.PIB_.LNKD irq 0: [15] 0+ low,level,sharable 0.10.0 pci0: on pcib0 pci0: physical bus=0 map[10]: type 1, range 32, base e8100000, size 20, enabled found-> vendor=0x1279, dev=0x0395, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1279, dev=0x0396, revid=0x00 bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1279, dev=0x0397, revid=0x00 bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base e9000000, size 24, enabled map[14]: type 3, range 32, base f0000000, size 27, enabled pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.PIB_.LNKB) pcib0: possible interrupts: 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.PIB_.LNKD (references 2, priority 100040): interrupts: 15 penalty: 50020 \\_SB_.PCI0.PIB_.LNKC (references 2, priority 10040): interrupts: 7 penalty: 5020 \\_SB_.PCI0.PIB_.LNKA (references 5, priority 250): interrupts: 9 penalty: 50 \\_SB_.PCI0.PIB_.LNKB (references 4, priority 160): interrupts: 11 penalty: 40 pcib0: slot 5 INTA routed to irq 11 via \\_SB_.PCI0.PIB_.LNKB found-> vendor=0x10de, dev=0x0112, revid=0xb2 bus=0, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x0686, revid=0x40 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00001040, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3057, revid=0x40 bus=0, slot=7, func=4 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001400, size 8, port disabled map[14]: type 4, range 32, base 00001054, size 2, enabled map[18]: type 4, range 32, base 00001050, size 2, enabled found-> vendor=0x1106, dev=0x3058, revid=0x50 bus=0, slot=7, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base e8020000, size 12, enabled map[14]: type 4, range 32, base 00001000, size 6, enabled map[18]: type 1, range 32, base e8000000, size 17, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.PIB_.LNKA) pcib0: possible interrupts: 9 ACPI PCI link arbitrated settings: \\_SB_.PCI0.PIB_.LNKD (references 2, priority 100080): interrupts: 15 penalty: 50040 \\_SB_.PCI0.PIB_.LNKC (references 2, priority 10080): interrupts: 7 penalty: 5040 \\_SB_.PCI0.PIB_.LNKA (references 5, priority 500): interrupts: 9 penalty: 100 pcib0: slot 8 INTA routed to irq 9 via \\_SB_.PCI0.PIB_.LNKA found-> vendor=0x8086, dev=0x1059, revid=0x10 bus=0, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0013, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled found-> vendor=0x104c, dev=0xac55, revid=0x01 bus=0, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled found-> vendor=0x104c, dev=0xac55, revid=0x01 bus=0, slot=11, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8022000, size 12, enabled pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.PIB_.LNKA) pcib0: slot 12 INTA is already routed to irq 9 found-> vendor=0x1033, dev=0x0035, revid=0x41 bus=0, slot=12, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8023000, size 12, enabled pcib0: matched entry for 0.12.INTB (src \\_SB_.PCI0.PIB_.LNKB) pcib0: slot 12 INTB is already routed to irq 11 found-> vendor=0x1033, dev=0x0035, revid=0x41 bus=0, slot=12, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8021000, size 8, enabled pcib0: matched entry for 0.12.INTC (src \\_SB_.PCI0.PIB_.LNKC) pcib0: possible interrupts: 7 ACPI PCI link arbitrated settings: \\_SB_.PCI0.PIB_.LNKD (references 2, priority 100120): interrupts: 15 penalty: 50060 \\_SB_.PCI0.PIB_.LNKC (references 2, priority 10120): interrupts: 7 penalty: 5060 pcib0: slot 12 INTC routed to irq 10 via \\_SB_.PCI0.PIB_.LNKC found-> vendor=0x1033, dev=0x00e0, revid=0x02 bus=0, slot=12, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x84 (3960 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 5.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 isab0: TC1000 Serial1 port enabler atapci0: port 0x1040-0x104f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1040 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] isab1: at device 7.4 on pci0 isa: isa0 already exists; skipping it device_attach: isab1 attach returned 6 pcm0: port 0x1050-0x1053,0x1054-0x1057,0x1400-0x14ff at device 7.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1400 pcib0: matched entry for 0.7.INTC (src \\_SB_.PCI0.PIB_.LNKC) pcib0: slot 7 INTC is already routed to irq 10 pcm0: [GIANT-LOCKED] pcm0: pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: sndbuf_setmap 1bc000, 1000; 0xc1168000 -> 1bc000 pcm0: sndbuf_setmap 1da000, 1000; 0xc1166000 -> 1da000 fxp0: port 0x1000-0x103f mem 0xe8000000-0xe801ffff,0xe8020000-0xe8020fff irq 9 at device 8.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8020000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1059 0e11 00b5 0010 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:0b:cd:ac:b8:24 fxp0: [MPSAFE] cbb0: at device 11.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.PIB_.LNKA) pcib0: slot 11 INTA is already routed to irq 9 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac55104c 0x02100007 0x06070001 0x00822000 0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400109 0x40: 0x00b50e11 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x08449061 0x00000000 0x00000000 0x01001022 0x90: 0x606400c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000001f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: at device 11.1 on pci0 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.PIB_.LNKB) pcib0: slot 11 INTB is already routed to irq 11 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac55104c 0x02100007 0x06070001 0x00822000 0x10: 0x80001000 0x020000a0 0x20050400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b 0x40: 0x00b50e11 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x08449061 0x00000000 0x00000000 0x01001022 0x90: 0x606400c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000001f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 ohci0: mem 0xe8022000-0xe8022fff irq 9 at device 12.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8022000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xe8023000-0xe8023fff irq 11 at device 12.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8023000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: on ohci1 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xe8021000-0xe80210ff irq 10 at device 12.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe8021000 ehci0: [GIANT-LOCKED] usb2: EHCI version 0.95 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 5 ports with 5 removable, self powered acpi_tz0: on acpi0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xe7000-0xe7fff,0xc0000-0xcdfff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0 failed to probe at port 0x60 on isa0 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio0: irq maps: 0x601 0x611 0x601 0x601 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices ukbd0: Jing-Mold USB K/B+Mouse, rev 1.10/3.20, addr 2, iclass 3/1 kbd0 at ukbd0 kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000 ums0: Jing-Mold USB K/B+Mouse, rev 1.10/3.20, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Device configuration finished. procfs registered Timecounter "TSC" frequency 995502716 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_acad0: acline initialization start system power profile changed to 'economy' acpi_acad0: Off Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_ec0: info: new max delay is 60 us acpi_cmbat0: battery initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on VIA 82C686B chip ata0-master: setting UDMA100 on VIA 82C686B chip ad0: ATA-6 disk at ata0-master ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1001/254/63 s:63 l:16097067 [1] f:80 typ:165 s(CHS):1002/0/1 e(CHS):1023/12/63 s:16097130 l:36644265 [2] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/6/63 s:52741395 l:12691350 [3] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/15/63 s:65432745 l:12707415 GEOM: Configure ad0s1, start 32256 length 8241698304 end 8241730559 GEOM: Configure ad0s2, start 8241730560 length 18761863680 end 27003594239 GEOM: Configure ad0s3, start 27003594240 length 6497971200 end 33501565439 GEOM: Configure ad0s4, start 33501565440 length 6506196480 end 40007761919 GEOM: Configure ad0s2a, start 0 length 432263680 end 432263679 GEOM: Configure ad0s2b, start 432263680 length 921600000 end 1353863679 GEOM: Configure ad0s2c, start 0 length 18761863680 end 18761863679 GEOM: Configure ad0s2d, start 1353863680 length 512000000 end 1865863679 GEOM: Configure ad0s2e, start 1865863680 length 1536000000 end 3401863679 GEOM: Configure ad0s2f, start 3401863680 length 3072000000 end 6473863679 GEOM: Configure ad0s2g, start 6473863680 length 12288000000 end 18761863679 GEOM: Configure ad0s3a, start 0 length 353971200 end 353971199 GEOM: Configure ad0s3b, start 353971200 length 614400000 end 968371199 GEOM: Configure ad0s3c, start 0 length 6497971200 end 6497971199 GEOM: Configure ad0s3d, start 968371200 length 409600000 end 1377971199 GEOM: Configure ad0s3e, start 1377971200 length 1024000000 end 2401971199 GEOM: Configure ad0s3f, start 2401971200 length 4096000000 end 6497971199 GEOM: Configure ad0s4a, start 0 length 362196480 end 362196479 GEOM: Configure ad0s4b, start 362196480 length 614400000 end 976596479 GEOM: Configure ad0s4c, start 0 length 6506196480 end 6506196479 GEOM: Configure ad0s4d, start 976596480 length 409600000 end 1386196479 GEOM: Configure ad0s4e, start 1386196480 length 1024000000 end 2410196479 GEOM: Configure ad0s4f, start 2410196480 length 4096000000 end 6506196479 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init acpi_ec0: info: new max delay is 90 us